Primary Belt Cleaner With Bi-Color Blade Easy Visual Inspection
Product application | Primary Belt Cleaner With Bi-Color Blade |
Width of belt | 2000mm |
Industry | Coal Power-fire plant |
Material | Coal |
Problem
- The system was experiencing carryback and fugitive material, despite having primary cleaners in place from another manufacturer but standard belt cleaners lasted only days, failed to resolve the poor effectiveness and short service life.Not easy visual inspection.
Belt cleaners were not easily adjusted and maintained, the procedures for the service of belt cleaners are cumbersome or complicated. Adjustment is made too infrequently, so spillage occurs intermittently.
Required manpower to be diverted from normal tasks to do clean-up. Both of these reduced overall process efficiency and negatively impacted productivity, ultimately reducing profitability.
Not easy visual inspection
belt cleaners lasted only days
Required manpower to clean up
Solution
- Jimway examined the issue and determined that the best option was to replace the existing equipment with a JIMWAY PRIMARY BELT CLEANER:C1UD .Using the bi-color blade with the clear wear line and timely correcting blade pressure by inspection windows , fast and easy installation, adjustment and maintenance , The cleaners eliminated the excessive carryback, reduced the material accumulation, and protected the conveyor belts from damage.
Easy Visual Inspection
Bi-Color blade with the clear wear line
Results
- The superior performance of the JIMWAY's C1UD primary Cleaner on the conveyor largely reduced the carryback and therefore reduced the number of hours spent manually cleaning the area, If the blades are seen to be worn out, simply replace them without dismantling the whole set, saving the plant time and money. Additionally, the amount of dust generated was reduced. The customer stated, "this cleaner greatly reducing our on-site labor also the working conditions have been greatly improved.”
No material spillage
From customer
The customer stated, "this cleaner greatly reducing our on-site labor also the working conditions have been greatly improved.”